Publications List of Dr. Ali Hasanbeigi
Dr. Hasanbeigi has over 160 publications with over 35 peer-reviewed international journal articles, over 40 international conference papers, over 90 project reports, and 10 energy analysis tools. Majority as lead author/developer.
IPCC Report:
1. Intergovernmental Panel on Climate Change (IPCC). Contributing Author for “Industry” Chapter of the Sixth Assessment Report on Mitigation of Climate Change in 2022.
2. Intergovernmental Panel on Climate Change (IPCC). Contributing Author for “Industry” Chapter of the Fifth Assessment Report on Mitigation of Climate Change in 2014.
Book chapter:
3. Kenneth G. H. Baldwin, et al., 2021. Transitioning to a Prosperous, Resilient and Carbon-Free Economy - A Guide for Decision-Makers. Cambridge University Press.
Reports:
4. Hasanbeigi, A.; Sibal, A. 2025. What is Green Aluminum? Definitions from Standards, Initiatives, and Policies around the World. Global Efficiency Intelligence. (forthcoming)
5. Hasanbeigi, Ali; Springer, Cecilia; Wei, Dennis. 2025. Low-Carbon Thermal Energy Roadmap for the Textile Industry. Global Efficiency Intelligence. (forthcoming)
6. Hasanbeigi, A.; Sibal, A.; Springer, C. 2024. China’s Steel Transformation: From Blast Furnaces to Electric Arc Furnaces. Global Efficiency Intelligence. (forthcoming)
7. Hasanbeigi, A., Springer, C., Sibal, A. 2024. Electrifying European Industry - Part 1: Electrification of Industrial Processes. Global Efficiency Intelligence.
8. Springer, C., Hasanbeigi, A., and Sibal, A. 2024. Electrifying European Industry - Part 2: Electric Boilers and Industrial Heat Pumps. Global Efficiency Intelligence.
9. Hasanbeigi, Ali; Springer, Cecilia. (2024). Electrification of Heating in a Textile Plant in India: A Case Study. Global Efficiency Intelligence.
10. Hasanbeigi, Ali; Springer, Cecilia; Wei, Dennis. (2024). Low-Carbon Thermal Energy Technologies for the Textile Industry. Global Efficiency Intelligence.
11. Hasanbeigi, Ali; Springer, Cecilia. (2024). Electrification of Industrial Heating in India: White Papers on Electrifying Heating in Typical Industrial Plants in India. Global Efficiency Intelligence.
12. Hasanbeigi, Ali; Zuo, Bonnie; Springer, Cecilia; Jackson, Alastair; Kim, Daseul; Heo, Esther Haerim. (2024). Green Steel Economics: Comparing the Economics of Green H2-DRI and Traditional Steelmaking Around the World. Global Efficiency Intelligence, LLC; TransitionAsia; Solutions for Our Climate (SFOC).
13. Dollinger, Caroline; Cresko, Joe; Gage, Sam; Kamath, Dipti; Zuberi, Jibran; Hasanbeigi, Ali; Ray, Brian. (2024). Pathways Analysis Summary: Decarbonization Potential for Industrial Subsectors – Preliminary Modeling Results. Energetics; U.S. DOE, Industrial Efficiency and Decarbonization Office (IEDO). (Dr. Ali Hasanbeigi of GEI was the Lead for Steel and Cement Industry)
14. Hasanbeigi, Ali; Springer, Cecilia; Sibal, Adam. (2024). Green Hydrogen for Decarbonizing Asia's Industrial Giants: Analyzing H2 Electrolyzer Market Opportunity in Key Industrial Applications. Global Efficiency Intelligence.
15. Hasanbeigi, Ali; Srinivasan, Pavitra; Chen, Hellen; Esram, Nora. (2024). Adoption of Limestone Calcined Clay Cement and Concrete in the U.S. Market. Global Efficiency Intelligence and ACEEE.
16. Hasanbeigi, Ali; Springer, Cecilia; Irish, Hannah. (2024). Green H2-DRI Steelmaking: 15 Challenges and Solutions. Global Efficiency Intelligence
17. Hasanbeigi, Ali; Springer, Cecilia; Fernando, Sujeewa; Dehod, Nicholas; Vidanagama, Jagathdeva; Rajaguru, Methmali; Mendis, Rashindu. (2024). Industrial Energy Efficiency and Decarbonization in Sri Lanka. Global Efficiency Intelligence and UNIDO.
18. Hasanbeigi, Ali; Springer, Cecilia ; Bhadbhade, Navdeep; (2024). Advancing Green Public Procurement of Steel and Cement in China. Global Efficiency Intelligence.
19. Hasanbeigi, Ali; Springer, Cecilia (2024). Industrial Decarbonization Roadmap Framework for the Cement and Steel Industry Morocco. (A White Paper). Global Efficiency Intelligence for United Nations Industrial Development Organization (UNIDO).
20. Hasanbeigi, Ali; Springer, Cecilia; Zuberi, Jibran; Lu, Hongyou; Zhou, Nan. 2023. Electrifying Industrial Heating in China. Global Efficiency Intelligence, LLC. and Lawrence Berkeley National Lab
21. Hasanbeigi, Ali; Sibal, Adam. 2023. What are Green Cement and Concrete? Definitions and Scopes from Standards, Initiatives, and Policies Around the World. Global Efficiency Intelligence, LLC.
22. Hasanbeigi, Ali; Springer, Cecilia (2023). Industrial Electrification in the Southwest States. Global Efficiency Intelligence, LLC.
23. Hasanbeigi, Ali; Bhadbhade, Navdeep; Springer, Cecilia (2023). Corporates, Electricity, and Renewables: An Analysis of Industrial Electricity Use and CO2 Emissions Across the Globe. Global Efficiency Intelligence, LLC.
24. Hasanbeigi, Ali; Bhadbhade, Navdeep (2023). Emissions Impacts of Alternative Fuels Combustion in the Cement Industry. Global Efficiency Intelligence, LLC.
25. Hasanbeigi, Ali; (2023). Embodied CO2 Emissions in Steel Imports to the U.S. Global Efficiency Intelligence, LLC.
26. Hasanbeigi, Ali; Sibal, Adam (2023). Stopping a Super-Pollutant: N2O Emissions Abatement from Global Adipic Acid Production. Global Efficiency Intelligence, LLC.
27. Hasanbeigi, Ali; Bhadbhade, Navdeep (2023). Green Public Procurement of Steel in India, Japan, and South Korea. Global Efficiency Intelligence, LLC.
28. Hasanbeigi, Ali; Lu, Hongyou; Zhou, Nan (2023). Net Zero Roadmap for the Steel Industry in China. Global Efficiency Intelligence, LLC. and Lawrence Berkeley National Lab
29. Hasanbeigi, Ali; Kirshbaum, Lynn., Collison, Blaine (2023). Industrial Electrification: An industrial subsector- and state-level analysis. Global Efficiency Intelligence, LLC & David Gardiner and Associates.
30. Hasanbeigi, Ali; Sibal, Adam (2023). What is Green Steel? Global Efficiency Intelligence, LLC.
31. Hasanbeigi, Ali; Sibal, Adam (2023). Deep decarbonization roadmap for the PVC industry in the U.S. Global Efficiency Intelligence, LLC.
32. Hasanbeigi, Ali and Darwili, Aldy. (2022). Embodied Carbon in Trade: Carbon Loophole. Global Efficiency Intelligence, LLC.
33. Hasanbeigi, Ali (2022). Steel Climate Impact - An International Benchmarking of Energy and CO2 Intensities. Global Efficiency Intelligence, LLC.
34. Hasanbeigi, Ali; Springer, Cecilia.; Shi, Dinah (2022). Aluminum Climate Impact - An International Benchmarking of Energy and CO2 Intensities. Global Efficiency Intelligence, LLC.
35. Cresko, Joe; Rightor, Ed; Hasanbeigi, Ali; et al. (2022). US Industrial Decarbonization Roadmap. US Department of Energy.
36. Hasanbeigi, Ali (2022). U.S. Border Carbon Adjustment for Aluminum and Steel. Global Efficiency Intelligence, LLC.
37. Hasanbeigi, Ali; Shi, Dinah; Bhadbhade, Navdeep (2022). Advancing Buy Clean Policy in Canada. Global Efficiency Intelligence, LLC.
38. Zuberi, Jibran; Hasanbeigi, Ali; Morrow, William (2022). Electrification through Industrial Heat Pump Applications in U.S. Manufacturing. Lawrence Berkeley National Lab & Global Efficiency Intelligence, LLC.
39. Hasanbeigi, Ali; Zuberi, Jibran; (2022). Electrification of heat in the textile industry. Global Efficiency Intelligence, LLC.
40. Cresko, Joe; Hasanbeigi, Ali; et al. (2022). Thermal Process Intensification in Industry. US Department of Energy.
41. Zuberi, Jibran; Hasanbeigi, Ali; Morrow, William (2022). Electrification of Boilers in U.S. Manufacturing. Lawrence Berkeley National Lab & Global Efficiency Intelligence, LLC.
42. Hasanbeigi, Ali; et al. (2022). Industrial Energy Efficiency Market Assessment in Ghana. United Nations Industrial Development Organization (UNIDO).
43. M'barek, Badr; Hasanbeigi, Ali; Gray, Matthew (2021). Global Steel Production Cost- A country- and plant-level cost analysis. Global Efficiency Intelligence, LLC. and TransitionZero.
44. Hasanbeigi, Ali; Shi, Dinah (2021). Target Setting for Green Public Procurement Programmes. UNIDO and Clean Energy Ministerial and LeadIt.
45. Hasanbeigi, Ali; Shi, Dinah (2021). Standards and Evaluation Guidelines for Green Public Procurement. UNIDO and Clean Energy Ministerial and LeadIt.
46. Hasanbeigi, Ali; Shi, Dinah (2021). Compliance and Program Evaluation for Green Public Procurement. UNIDO and Clean Energy Ministerial and LeadIt.
47. Hasanbeigi, Ali; Astrid Nilsson, Gökce Mete, Germain Fontenit; Shi, Dinah (2021). Fostering Industry Transition through Green Public Procurement: A "How to" Guide for the Cement & Steel Sectors. UNIDO and Clean Energy Ministerial and LeadIt.
48. Hasanbeigi, Ali; Shi, Dinah; Khutal, Harsh. (2021). Federal Buy Clean for Cement and Steel. Global Efficiency Intelligence, LLC.
49. Morrow, William; Hasanbeigi, Ali; Marano, John; (2021). Energy Efficiency Potentials and R&D Opportunities in California’s Chemical Industry. Lawrence Berkeley National Lab and Global Efficiency Intelligence.
50. Hasanbeigi, Ali; Collison, B., Kirshbaum, L., Gardiner, D. (2021). Electrifying U.S. Industry: Technology and Process-Based Approach to Decarbonization. Global Efficiency Intelligence, LLC.
51. Hasanbeigi, Ali; Khutal, Harsh. (2021). Scale of Government Procurement of Carbon-Intensive Materials in the United States. Global Efficiency Intelligence, LLC.
52. Hasanbeigi, Ali; Morrow, B., Shehabi, A. (2021). Embodied Carbon In The U.S. Manufacturing And Trade. Global Efficiency Intelligence, LLC.
53. Hasanbeigi, Ali; Khutal, Harsh. (2021). Industrial Supply Chains Decarbonization in Southeast Asia. Global Efficiency Intelligence, LLC.
54. Stankovic, Mirjana; Hasanbeigi, Ali; Neftenov, Nikola. 2020. Use of 4IR Technologies in Water and Sanitation in Latin America and the Caribbean. Inter-American Development Bank.
55. Hasanbeigi, Ali; Becque, Renilde; Springer, Cecilia (2019). Curbing Carbon from Consumption: The Role of Green Public Procurement. San Francisco, CA. Global Efficiency Intelligence, LLC.
56. Hasanbeigi, Ali; Springer, Cecilia (2019). How clean is the US steel industry? An international benchmarking of steel industry’s GHG emissions. San Francisco, CA. Global Efficiency Intelligence, LLC. (forthcoming).
57. Hasanbeigi, Ali; Springer, Cecilia (2019). Deep Decarbonization Roadmap for California’s Cement and Concrete Industry. San Francisco, CA. Global Efficiency Intelligence, LLC.
58. Hasanbeigi, Ali; Springer, Cecilia (2019). California’s Cement Industry: Failing the Climate Challenge. San Francisco, CA. Global Efficiency Intelligence, LLC.
59. Hasanbeigi, Ali; Moran, Dan; Springer, Cecilia (2018). The Carbon Loophole in Climate Policy: Quantifying the Embodied Carbon in Traded Products. San Francisco, CA. Global Efficiency Intelligence, LLC.
60. Hasanbeigi, Ali. (2017). U.S. Industrial Motor Systems Energy Efficiency Reports Series, Covering 30 States. San Francisco, CA. Global Efficiency Intelligence, LLC.
61. Springer, Cecilia; Hasanbeigi, Ali; Price, Lynn (2017). Emerging Energy Efficiency and CO2 Emissions Reduction Technologies for the Glass Industry. Berkeley, CA: Lawrence Berkeley National Laboratory.
62. Hasanbeigi, Ali; Nina Khanna, Price, Lynn (2017). Air Pollutant Emissions Projection for the Cement and Steel Industry in China and the Impact of Emissions Control Technologies. Berkeley, CA: Lawrence Berkeley National Laboratory. 1007268
63. Liu, Xu; Shen, Bo; Price, Lynn; Lu, Hongyou; Hasanbeigi, Ali (2016). What China can learn from international policy experiences to improve industrial energy efficiency and reduce CO2 emissions? Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL- 1006470
64. Zhang, Qi; Hasanbeigi, Ali; Price, Lynn; Lu, Hongyou; Arens, Marlen (2016). A Bottom-up Energy Efficiency Improvement Roadmap for China’s Iron and Steel Industry up to 2050. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL- 1006356
65. Lawrence Berkeley National Laboratory (Hasanbeigi et al.), Rocky Mountain Institute, Energy Research Institute of China, and Energy Foundation. 2016. Reinventing Fire: China. A roadmap for China’s revolution in energy consumption and production to 2050.
66. Springer, Cecilia; Hasanbeigi, Ali and Price, Lynn (2016). Emerging Energy Efficiency and CO2 Emissions Reduction Technologies for the Aluminum Industry. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-1005789
67. Hasanbeigi, Ali; Arens, Marlene; Cardenas, Jose C.R.; Price, Lynn; Triolo, Ryan (2015). Development of a Framework for Comparison of Energy-Related CO2 Emission Intensity of the Iron and Steel Industry in China, Germany, Mexico and the U.S. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-1004069
68. Hernandez, Carolina; Letschert, Virginie; Hasanbeigi, Ali; Karali, Nihan; Padilla, Marcelo; Pavon, Mariana (2015). Estudio Preparatorio para la Implementación en Chile de Estándares Mínimos de Eficiencia Energética en Motores Industriales (Preparatory Study for the Implementation of Minimum Energy Efficiency Standards in Chile’s Industrial Electric Motors). Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-187346 (In Spanish).
69. Hasanbeigi, Ali; Letschert, Virginie; (2015). Methodology for Estimating International Prices of Energy-efficient Electric Motors and Results for 18 Major Economies around the World. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-182927
70. Ma, Ding, Hasanbeigi, Ali; Price, Lynn; Chen, Wenying (2015). Energy-Efficiency and Air Emisisons Reduction Opportunities for the Ammonia Industry in China. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-183064
71. Hasanbeigi, Ali; Harrell, Greg; Schreck, Bettina (2014). Energy Efficiency Potentials in Industrial Steam Systems in China: Development of the Steam Systems Energy Efficiency Cost Curve. United Nations Industrial Development Organization (UNIDO), Vienna, Austria.
72. Hasanbeigi, Ali (2013). Emerging Technologies for an Energy-Efficient, Water-Efficient, and Low-Pollution Textile Industry. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-6510E
73. Hasanbeigi, Ali; Arens, Marlene; Price, Lynn; (2013). Emerging Energy Efficiency and CO2 Emissions Reduction Technologies for the Iron and Steel Industry. Berkeley, CA: Lawrence Berkeley National Laboratory BNL-6106E.
74. Hasanbeigi, Ali; Zeyi Jiang, Price, Lynn (2013). Analysis of the Past and Future Trends of Energy Use in Key Medium and Large-Sized Chinese Steel Enterprises, 2000-2030. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-6380E.
75. Morrow, William R., John Marano, Jayant A. Sathaye, Ali Hasanbeigi, and Tengfang T. Xu. 2013. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry. Berkeley: Lawrence Berkeley National Laboratory. LBNL-6292E
76. Kong, Lingbo; Hasanbeigi, Ali; Price, Lynn, Huanbin Liu (2013). Analysis of Energy-Efficiency Opportunities for the Pulp and Paper Industry in China. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-6107E
77. Kong, Lingbo; Hasanbeigi, Ali; Price, Lynn (2013). Emerging Energy Efficiency and Greenhouse Gas Mitigation Technologies for the Pulp and Paper Industry. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-5956E.
78. Morrow, William; Hasanbeigi, Ali; Sathaye, Jayant; Xu, Tengfang. (2013). Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in the Cement Industry in India. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-6337E.
79. Morrow, William; Hasanbeigi, Ali; Sathaye, Jayant; Xu, Tengfang. (2013). Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in the iron and steel Industry in India. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-6338E.
80. Hasanbeigi, Ali; Price, Lynn; Fino-Chen, Cecilia; Lu, Hongyou; Ke, Jing (2013). Retrospective and Prospective Decomposition Analysis of Chinese
Manufacturing Energy Use, 1995-2020. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-6028E
81. Hasanbeigi, Ali; Agnes Lobscheid; Yue Dai; Price, Hongyou, Lynn; Lu (2012). Quantifying the Co-benefits of Energy-Efficiency Programs: A Case-study for the Cement Industry in Shandong Province, China Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-5949E.
82. Williams, Christopher; Hasanbeigi, Ali; Wu, Grace; Price, Lynn. (2012). International Experiences with Measuring and Quantifying the Co-Benefits of Energy Efficiency and Greenhouse Gas Mitigation Policies and Programs. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-5924E.
83. Hasanbeigi, Ali; Morrow, William; Masanet, Eric; Sathaye, Jayant; Xu, Tengfang. (2012). Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in the Cement Industry in China. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-5536E
84. Hasanbeigi, Ali; Morrow, William; Sathaye, Jayant; Masanet, Eric; Xu, Tengfang. (2012). Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in the Iron and Steel Industry in China. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-5535E
85. Hasanbeigi, Ali; Price, Lynn; Lin, Elina. (2012). Emerging Energy Efficiency and CO2 Emissions Reduction Technologies for Cement and Concrete Production. Berkeley, CA: Lawrence Berkeley National Laboratory LBNL-5434E.
86. Hasanbeigi, Ali; Lu, Hongyou; Price, Lynn. (2012). International Best Practices for Pre-processing and Co-processing of Municipal Solid Waste and Sewage Sludge in the Cement Industry. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-5581E
87. Hasanbeigi, Ali; Fino-Chen, Cecilia; Price, Lynn, (2012). Best Practices in Energy Efficiency and CO2 Emissions Reduction Technologies: Cement Industry- Resources for Energy Efficiency and Other Information for the Cement Industry. Berkeley, CA: Lawrence Berkeley National Laboratory.
88. Hasanbeigi, Ali; Price, Lynn; Aden, Nathaniel; Zhang Chunxia; Li Xiuping; Shangguan Fangqin, (2011). A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S. Berkeley, CA: Lawrence Berkeley National Laboratory LBNL-4836E.
89. Fridley, D.; Zheng, N.; Zhou, N.; Ke, J.; Hasanbeigi, A.; Price,L., (2011). China Energy and Emission Paths to 2030. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-4866E
90. Zhou, N.; Price, L.; Zheng, N.; Ke, J.; Hasanbeigi, A., (2011). National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China. Berkeley, CA: Lawrence Berkeley National Laboratory LBNL-5253E
91. Hasanbeigi, Ali; Price, Lynn, (2010). Industrial Energy Audit Guidebook: Guidelines for Conducting an Energy Audit in Industrial Facilities. Berkeley, CA: Lawrence Berkeley National Laboratory. In addition to the guidebook, several energy audit tools were developed. LBNL-3991E
92. Hasanbeigi, Ali, (2010). Energy Efficiency Improvement Opportunities for the Textile Industry. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-3970E
93. Price, Lynn; Hasanbeigi, Ali; Zhou, Nan, Thekdi, Arvind; Lan, Wang, (2010). Increasing Energy Efficiency and Reducing Emissions from China’s Cement Kilns: Audit Report of Two Cement Plants in Shandong Province, China. Berkeley, CA: Lawrence Berkeley National Laboratory.
94. McKane, Aimee; Hasanbeigi, Ali, (2010). Motor System Efficiency Supply Curves. United Nations Industrial Development Organization (UNIDO).
95. de la Rue du Can, S.; Hasanbeigi, A.; Sathaye , J., (2010). California Energy Balance Update and Decomposition Analysis for the Industry and Building Sectors. Berkeley, CA: Lawrence Berkeley National Laboratory.
96. Asia Pacific Partnership for Clean Development and Climate, (2010). The State–of-the-Art Clean Technologies (SOACT) for Steelmaking Handbook (2nd Edition). Prepared by Lawrence Berkeley National Laboratory, Berkeley, California and American Iron and Steel Institute, Washington, DC
97. Price, Lynn; Hasanbeigi, Ali; Hongyou, Lu; Lan, Wang (2009). Analysis of Energy-Efficiency Opportunities for the Cement Industry in Shandong Province, China. Berkeley, CA: Lawrence Berkeley National Laboratory. LBNL-2751E-Rev.
Peer-Reviewed Journal Articles:
98. Zuberi, Jibran, Ali Hasanbeigi, and William R. Morrow III. "Electrification of industrial boilers in the USA: potentials, challenges, and policy implications." Energy Efficiency 15.8 (2022).
99. Hasanbeigi, Ali, and Jibran Zuberi." Electrification of Steam and Thermal Oil Boilers in the Textile Industry: Techno-Economic Analysis for China, Japan, and Taiwan." Energies 15.23 (2022) 9179.
100. Zuberi, Jibran, Ali Hasanbeigi, and William R. Morrow III. "Electrification of U.S. Manufacturing With Industrial Heat Pumps." (2022).
101. Hasanbeigi, Ali, and Jibran Zuberi. "Electrified Process Heating in Textile Wet-Processing Industry: A Techno-Economic Analysis for China, Japan, and Taiwan." Energies 15.8939 (2022).
102. Zuberi, Jibran, Ali Hasanbeigi, and William R. Morrow III. "Bottom-up assessment of industrial heat pump applications in U.S. Food manufacturing." Energy Conversion and Management 272 (2022) 116349.
103. Zuberi, Jibran, Ali Hasanbeigi, and William R. Morrow III. "Electrification of Boilers in U.S. Manufacturing." (2021).
104. Liu, Xu; Shen, Bo; Price, Lynn; Hasanbeigi, Ali; Lu, Hongyou; (2019). A Review of International Best Practices for Energy Efficiency and CO2 Mitigation Policies and Their Implications for China. WIREs Energy and Environment.
105. Price, Lynn; Hasanbeigi, Ali; et al. 2019. A Roadmap for China to Peak Carbon Dioxide Emissions and Achieve a 20% Share of Non-Fossil Fuels in Primary Energy by 2030. Applied Energy.
106. Zhang, Q., Xu, J., Wang,Y., Hasanbeigi, A., Zhang, W., Lu, H., Arens, M. (2018). Comprehensive assessment of energy conservation and CO2 emissions mitigation in China’s iron and steel industry based on dynamic material flows. Applied Energy. Volume 209, 1 January 2018, Pages 251–265
107. Rojas-Cardenas, Jose; Hasanbeigi, Ali; Sheinbaum-Pardo, Claudia; Price, Lynn. (2017) Energy efficiency in Mexican iron and steel industry from an international perspective. Journal of Cleaner Production. Volume 158, 1 August 2017, Pages 335-348
108. Hasanbeigi, Ali; Arens, Marlene; Rojas-Cardenas, Jose; Price, Lynn; Triolo, Ryan. (2016). Comparison of Carbon Dioxide Emissions Intensity of Steel Industry in China, Germany, Mexico, and the United States. Resources, Conservation and Recycling. Volume 113, October 2016, Pages 127–139
109. Hasanbeigi, Ali; Harrell, Greg; Schreck, Bettina; Monga, Pradeep (2016). Moving Beyond Equipment and to Systems Optimization: Techno-Economic Analysis of Energy Efficiency Potentials in Industrial Steam Systems in China. Journal of Cleaner Production. Volume 120, 1 May 2016, Pages 53–63
110. Arens, Marlene; Worrell, Ernst. Eichhammer, Wolfgang; Hasanbeigi, Ali; Zhang. Qi (2015). Pathways to a low-carbon iron and steel industry in the medium-term – the case of Germany. Journal of Cleaner Production (Accepted- In press. Available online 6 January 2016).
111. Kong, Lingbo; Hasanbeigi, Ali; Price, Lynn (2015). Assessment of emerging energy-efficiency technologies for the pulp and paper industry: A technical review. Journal of Cleaner Production. Volume 122, 20 May 2016, Pages 5–28
112. Morrow, William; Marano, John; Hasanbeigi, Ali; Masanet, Eric; Sathaye, Jayant; (2015). Efficiency Improvement and CO2 Emission Reduction Potentials in the United States Petroleum Refining Industry. Energy 93 (2015) 95-105.
113. Kong, Lingbo; Hasanbeigi, Ali; Price, Lynn, Huanbin Liu (2015). Energy conservation and CO2 mitigation potentials in the Chinese pulp and paper industry. Resource Conservation and Recycling (Accepted- In Press. Available online 29 May 2015).
114. Hasanbeigi, Ali; Price, Lynn; (2015). A Technical Review of Emerging Technologies for Energy and Water Efficiency and Pollution Reduction in the Textile Industry. Journal of Cleaner Production. DOI 10.1016/j.jclepro.2015.02.079.
115. Ma, Ding; Hasanbeigi, Ali; Price, Lynn; Chen, Wenying; Wang, Lining (2015). Assessment of energy-saving and emission reduction potentials in China’s ammonia industry. Clean Technology and Environmental Policy journal. DOI 10.1007/s10098-014-0896-3
116. Hasanbeigi, Ali; Arens, Marlene; Price, Lynn; (2014). Alternative Emerging Ironmaking Technologies for Energy-efficiency and Carbon Dioxide Emissions Reduction: A Technical Review. Renewable and Sustainable Energy Reviews, Volume 33, May 2014, Pages 645–658.
117. Hasanbeigi, Ali; Zeyi Jiang, Price, Lynn (2014). Retrospective and Prospective Analysis of the Trends of Energy Use in Chinese Iron and Steel Industry. Journal of Cleaner Production. Volume 74, 1 July 2014, Pages 105–118
118. Morrow, William; Hasanbeigi, Ali; Sathaye, Jayant; Xu, Tengfang. 2014. Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in India’s Cement and Iron & Steel Industries. Journal of Cleaner Production. Volume 65, 15 February 2014, Pages 131–141
119. Hasanbeigi, Ali; Price, Lynn, Aden, Nathaniel; Zhang Chunxia; Li Xiuping; Shangguan Fangqin. 2014. Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S. Journal of Cleaner Production, Volume 65, 15 February 2014, Pages 108–119
120. Hasanbeigi, Ali; Price, Lynn; Fino-Chen, Cecilia; Lu, Hongyou; Ke, Jing (2013). Retrospective and Prospective Decomposition Analysis of Chinese Manufacturing Energy Use and Policy Implications. Energy Policy, Volume 63, December 2013, Pages 562–574.
121. Hasanbeigi, Ali; Agnes Lobscheid; Hongyou, Lu; Price, Lynn; Yue Dai (2013). Quantifying the Co-benefits of Energy-Efficiency Programs: A Case-study for the Cement Industry in Shandong Province, China. Science of the Total Environment. Volumes 458–460, 1 August 2013, Pages 624-636.
122. Hasanbeigi, Ali; Morrow, William; Masanet, Eric; Sathaye, Jayant; Xu, Tengfang. 2013. Energy Efficiency Improvement Opportunities in the Cement Industry in China. Energy Policy Volume 57, June 2013, Pages 287–297
123. Hasanbeigi, Ali; Morrow, William; Sathaye, Jayant; Masanet, Eric; Xu, Tengfang. (2013). A Bottom-Up Model to Estimate the Energy Efficiency Improvement and CO2 Emission Reduction Potentials in the Chinese Iron and Steel Industry. Energy, Volume 50, 1 February 2013, Pages 315-325
124. Hasanbeigi, Ali; Price, Lynn, Lin, Elina. (2012). Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production: A Technical Review. Renewable and Sustainable Energy Reviews 16 (2012) 6220–6238.
125. Kong, Lingbo; Price, Lynn; Hasanbeigi, Ali; Liu, Huanbin; Li, Jigeng. Potential for Reducing Paper Mill Energy Use and Carbon Dioxide Emissions through Plant-wide Energy Audits: A Case Study in China. Applied Energy, Volume 102, February 2013, Pages 1334–1342
126. Hasanbeigi, Ali; Hasanabadi, Abdollah; Abdolrazaghi, Mohamad, (2012). Energy Intensity Analysis for Five Major Sub-Sectors of the Textile Industry. Journal of Cleaner Production 23 (2012) 186-194
127. Hasanbeigi, Ali; Price, Lynn (2012). A Review of Energy Use and Energy Efficiency Technologies for the Textile Industry. Renewable and Sustainable Energy Reviews 16 (2012) 3648– 3665.
128. Hasanbeigi, Ali, de la Rue du Can, S.; Sathaye, J., (2012). Analysis and Decomposition of the Energy Intensity of Industries in California. Energy Policy 46 (2012) 234–245.
129. McKane, Aimee; Hasanbeigi, Ali, (2011). Motor System Energy Efficiency Supply Curves: A Methodology for Assessing the Energy Efficiency Potential of Industrial Motor Systems. Energy Policy 39 (2011) 6595–6607
130. Hasanbeigi, Ali; Menke, Christoph; Therdyothin, Apichit (2010). Technical and Cost Assessment of Energy Efficiency Improvement and Greenhouse Gas Emissions Reduction Potentials in Thai Cement Industry. Energy Efficiency. DOI 10.1007/s12053-010-9079-1
131. Hasanbeigi, Ali; Menke, Christoph; Therdyothin, Apichit (2010). The Use of Conservation Supply Curves in Energy Policy and Economic Analysis: the Case Study of Thai Cement Industry. Energy Policy 38 (2010) 392–405
132. Hasanbeigi, Ali; Price, Lynn; Hongyou, Lu; Lan, Wang (2010). Analysis of Energy-Efficiency Opportunities for the Cement Industry in Shandong Province, China: A Case-Study of Sixteen Cement Plants. Energy-the International Journal 35 (2010) 3461-3473.
133. Hasanbeigi, Ali; Menke, Christoph; Price, Lynn (2010). The CO2 Abatement Cost Curve for the Thailand's Cement Industry. Journal of Cleaner Production. Volume 18, Issue 15, November 2010, Pages 1509-1518.
134. Hasanbeigi, Ali; Menke, Christoph; du Pont, Peter (2010). Barriers to Energy Efficiency Improvement and Decision-Making Behavior in Thai Industry. Energy Efficiency, Volume 3, Issue 1 (2010), Page 33. DOI 10.1007/s12053-009-9056-8.
Peer-Reviewed Conference Papers:
135. Hasanbeigi, Ali; Collison, B., Kirshbaum, L., Gardiner, D. (2021). Systems- and technology-level analysis of electrification potential in U.S. manufacturing. ACEEE Industrial Summer Study. July 2021, USA.
136. Hasanbeigi, Ali; Shi, Dinah; Khutal, Harsh. (2021). Federal Buy Clean Policy for Construction Materials in the United States. ACEEE Industrial Summer Study. July 2021, USA.
137. Hasanbeigi, Ali; Springer, Cecilia; Becque, Renilde (2021). Green Public Procurement and Buy Clean Policies and Programs Around the World. ACEEE Industrial Summer Study. July 2021, USA.
138. Hasanbeigi, Ali. 2018. Opportunities for Industrial Circular Economy in Cement and Concrete Industry. International Conference on Integrated and Innovative Solutions for Circular Economy. October 2018. Taipei. Taiwan.
139. Price, Lynn; Khanna, Nina; Nan Zhou, Fridley, David; Hasanbeigi, Ali; Hongyou Lu, and Wei Feng. 2017. Reinventing Fire: China – the Role of Energy Efficiency in China’s Roadmap to 2050. ECEEE Summer Study 2017. France.
140. Hasanbeigi, Ali; Letschert, Virginie (2016). Bottom-up Methodology for Estimating Prices of Energy-efficient Motors Internationally as a Tool for Policy Making. 2016 International Sustainable Energy and Environment Conference. 28-30 November 2016, Bangkok, Thailand.
141. Hasanbeigi, Ali; McKane, Aimee (2016). Energy Efficiency Potential in Industrial Motor Systems in Thailand. 2016 International Sustainable Energy and Environment Conference. 28-30 November 2016, Bangkok, Thailand.
142. Hasanbeigi, Ali; Harrell, Greg; Schreck, Bettina; Monga, Pradeep (2016). Techno-Economic Analysis of Energy Efficiency Potentials in Industrial Steam Systems and Energy Policy Implications. 2015 The 2nd International Conference on Energy and Environment Research (ICEER 2015), Lisbon, Portugal. July 13-14, 2015.
143. Hasanbeigi, Ali; Zeyi Jiang, Price, Lynn (2014). Future Pathway for Energy Use in Chinese Steel Industry. 2014 CCEEE Fall Study on energy efficiency in industry, October 24-25, 2014. Beijing, China.
144. Morrow, William; Marano, John; Sathaye, Jayant; Hasanbeigi, Ali; Xu, Tengfang; (2014). Energy Efficiency Improvements Potential in the U.S. Petroleum Refining Industry, 2014 ECEEE Summer Study on energy efficiency in industry, June 2-5, 2014. Arnhem, the Netherlands.
145. Hasanbeigi, Ali; Zeyi Jiang, Price, Lynn (2014). Why the energy use of Chinese steel industry may peak as early as 2015? 2014 ECEEE Summer Study on energy efficiency in industry, June 2-5, 2014. Arnhem, the Netherlands.
146. Hasanbeigi, Ali; Agnes Lobscheid; Hongyou, Lu; Price, Lynn; Yue Dai (2014). Including the Co-benefits of Energy-Efficiency Programs and Projects in Cost-Benefit Analysis - A Case Study for the Cement Industry. International Conference on Clean Energy. June 8-12, 2014. Istanbul, Turkey.
147. Hasanbeigi, Ali; Price, Lynn (2014). Emerging Technologies for an Energy-Efficient, Water- Efficient, and Low- Pollution Textile Industry: A Technical Review. International Conference on Clean Energy. June 8-12, 2014. Istanbul, Turkey.
148. Rao, Prakash; Hasanbeigi, Ali; McKane, Aimee. 2013. A Framework for Surveying Installed Motor Systems. The 8th International Conference on Energy Efficiency in Motor Driven Systems (EEMODS 2013). Rio de Janeiro, Brazil. October 28 - 30, 2013.
149. Hasanbeigi, Ali; Price, Lynn; Lu, Hongyou; Fino-Chen, Cecilia; Ke, Jing (2013). Retrospective and Prospective Decomposition Analysis of Chinese Manufacturing Energy Use and Policy Implications for Industry Structural Change. International Conference on Frontier Issues in Economics and Management. Beijing University of Chemical Technology. July 3-4, 2013.
150. Hasanbeigi, Ali; Kong, Lingbo; Marlene Arens; Price, Lynn (2013). Emerging Energy-efficiency and CO2 Emissions-reduction Technologies for Industry: A Review of Technologies for Alternative Ironmaking and Pulp and Paper Industry. 2013 ACEEE Industrial Summer Study. July 2013, NY, USA.
151. Hasanbeigi, Ali; Price, Lynn; Lu, Hongyou; Fino-Chen, Cecilia; Ke, Jing (2013). What Shaped the Chinese Manufacturing Energy Use since 1995 and What’s the Prediction for the Future? ACEEE Industrial Summer Study. July 2013, NY, USA.
152. Hasanbeigi, Ali; Price, Lynn; Lu, Hongyou; Fino-Chen, Cecilia (2013). Bottom-up Assessment of Chinese Manufacturing Growth and Energy Use up to 2020. 2013 International Energy Workshop (IEW) hosted by the International Energy Agency (IEA, Paris, 19 - 21 June).
153. Hasanbeigi, Ali; Price, Lynn; Lu, Hongyou, Williams, Christopher (2012). International Best Practices in Pre-treatment and Co-processing of Municipal Solid Waste and Sewage Sludge in the Cement Industry. 2012 ECEEE Summer Study on energy efficiency in industry, September 11-14, 2012. Arnhem, the Netherlands.
154. Morrow, William; Hasanbeigi, Ali; Sathaye, Jayant; Masanet, Eric; Xu, Tengfang; (2012). A Bottom-up Technology-level Analysis for Assessing the Energy Efficiency Potential in China’s Iron and Steel Industry. 2012 ECEEE Summer Study on energy efficiency in industry, September 11-14, 2012. Arnhem, the Netherlands.
155. Hasanbeigi, Ali; Price, Lynn; Lu, Hongyou, Williams, Christopher (2012). Co-processing of Municipal Solid Waste and Sewage Sludge in the Cement Industry. The 3rd ISIE Asia-Pacific Meeting, October 20-21 2012. Beijing, China.
156. Hasanbeigi, Ali; Price, Lynn; Lin, Elina. (2012). A Review of Emerging Energy Efficiency Technologies for the Cement and Concrete Production and Iron and Steel Industry. Industrial Energy Technology Conference (IETC), May 2012. New Orleans, USA.
157. Hasanbeigi, Ali; Morrow, William; Fridley, David; Masanet, Eric; Sathaye, Jayant; Xu, Tengfang; Zheng, Nina; Price, Lynn. (2012). Energy Efficiency Potential for China’s Cement Industry: A Bottom-up Technology-level Analysis. 19th CIRP International Conference on Life Cycle Engineering, March 2012. Berkeley, CA, USA.
158. Hasanbeigi, A., de la Rue du Can, S.; Sathaye , J., (2011). Analysis of the Energy Intensity of Industries in California. 2011 ACEEE Industrial Summer Study. July 2011, NY, USA.
159. Hasanbeigi, Ali; Hasanabadi, Abdollah; Abdolrazaghi, Mohamad, (2011). Energy Efficiency Technologies and Benchmarking the Energy Intensity for the Textile Industry. 2011 ACEEE Industrial Summer Study. July 2011, NY, USA.
160. McKane, Aimee; Hasanbeigi, Ali, (2011). Motor System Energy Efficiency Supply Curve. 2011 ACEEE Industrial Summer Study. July 2011, NY, USA.
161. Price, Lynn; Hasanbeigi, Ali, Aden, Nathaniel; Zhang Chunxia; Li Xiuping; Shangguan Fangqin, (2011). A Comparison of Iron and Steel Production Energy Intensity in China and the U.S. 2011 ACEEE Industrial Summer Study. July 2011, NY, USA.
162. McKane, Aimee; Hasanbeigi, Ali, (2011). Assessing the Energy Efficiency Potential of Industrial Motor Systems. The 7th International Conference on Energy Efficiency in Motor Driven Systems (EEMODS 2011). September 2011, Virginia, USA.
163. McKane, Aimee; Hasanbeigi, Ali, (2011). Co-hosted an informal session and presented a presentation. The session titled “Creating a Motor System Experts Data Network”. The 7th International Conference on Energy Efficiency in Motor Driven Systems (EEMODS 2011). September 2011, Virginia, USA.
164. Hasanbeigi, Ali; Hasanabadi, Abdollah; Abdolrazaghi, Mohamad, (2011). Comparison Study of Energy Intensity in the Textile Industry. Industrial Energy Technology Conference (IETC), May 2011. New Orleans, USA.
165. Hasanbeigi, Ali; Menke, Christoph, (2008). Technical and Policy Assessment for Energy Efficiency Improvements and Greenhouse Gas Emission Reductions in Thailand’s Cement Industry. Oral presentation at the International Conference on Energy Security and Climate Change: Issues, Strategies, and Options (ESCC 2008), August 6-8, 2008, Bangkok, Thailand.
166. Hasanbeigi, Ali; Hasanabadi, Abdollah; Abdorazaghi, Mohammad, (2006). A Review of Energy Consumption in Five Main Production Sectors of Iran’s Textile Industry. Oral presentation at 2nd Joint International Conference on “Sustainable Energy and Environment (SEE 2006)”, 21-23 November 2006, Bangkok, Thailand.
167. Hasanbeigi, Ali; Abbasi, Abbas; Abdorazaghi, Mohammad; Hasanabadi, Abdollah; (2006). Energy Consumption and Optimization in Textile Industry: A Case Study for Iran. Poster presentation at the first International Conference on Energy Management & Planning, June 20-21, 2006, Tehran, Iran.
Tools developed:
1. Carbon Voyage Tool: Embodied Carbon in Trade. 2023. This is a web-based application developed by Global Efficiency Intelligence to quantify embodied carbon in traded products. It offers a macro-analysis of embodied carbon in trade for specific countries/regions and key carbon-intensive products, such as steel, cement, clinker, and aluminum over time up to 2019. Available at https://www.globalefficiencyintel.com/carbon-voyage-tool
2. Structure and MAnufacturing Resource Tool for Water (SMART-Water). Lead developer. This is a spreadsheet-based tool that analyzes the effect of structural change in the manufacturing sector on manufacturing water use trend. It is available in both English and Chinese. 2015.
3. MAnufacturing STructure and Energy Research (MASTER) tool. Lead developer. This is a spreadsheet-based tool that does the structural analysis for the manufacturing sector using the decomposition analysis technique. Available in both English and Chinese. 2013.
4. Energy Efficiency Assessment and Greenhouse Gas Emission Reduction (EAGER) Tool for the pulp and Paper Industry. Lead developer. This is the spreadsheet-based tool that does the simple techno-economic analysis for energy efficiency measures for the pulp and paper industry that are built in the tool. Available in both English and Chinese. 2013.
5. Energy Efficiency Assessment and Greenhouse Gas Emission Reduction (EAGER) Tool for the Steel Industry. Lead developer. 2012.
6. Energy Efficiency Assessment and Greenhouse Gas Emission Reduction (EAGER) Tool for the Textile Industry. Lead developer. 2011.
7. Sewage Sludge Use in Cement Companies as an Energy Source (SUCCESS) Tool. Lead developer. It is a decision-support tool for implementing environmentally and economically cost-effective handling schemes for the use of sewage sludge as an alternative fuel in the cement industry. Available in both English and Chinese. 2012.
8. Developed tools for Conducting an Energy Audit in Industrial Facilities. Three tools were developed as parts of Industrial Energy Audit Guidebook. The tools do the energy use pattern analysis, load profile analysis, and cost-benefit analysis. Available in both English and Chinese. 2010.
9. Technology database for Best Practices in Energy Efficiency and CO2 Emissions Reduction Technologies for the Cement Industry. Lead developer. This is one of the most comprehensive technology database for the cement industry to date. Available in both English and Chinese. 2012.
10. Benchmarking and Energy Savings Tool (BEST) Cement. Co-developer. It is a process-based tool based on all commercially available efficiency technologies used anywhere in the world applicable to the cement industry, designed for use in China. Available in both English and Chinese. 2009-2010.